Why shouldn't I use graphite powder in modern locks?

Modern locks have much smaller, more intricate parts than antique locks. Graphite powder accumulates in tight spaces and can bind with any moisture or oil to create a gummy or hardened jam. This cement-like buildup interferes with the precise operation of modern lock mechanisms.

What should I use instead of graphite powder?

Use Houdini Lock Lube, a non-oil based lubricant specifically designed for modern locks. It's effective for locks that are working but feel sticky or stiff, and for preventive maintenance on functional locks that are completely dry.

When should I call a locksmith instead of using lubricant?

Call a professional locksmith when your lock already contains graphite powder, has solidified or gummy buildup, your key is hard to turn or won't insert fully, the lock wasn't working well to begin with, the cylinder feels gritty or crunchy, or lubrication hasn't solved the problem.

Did graphite powder work well in old locks?

Yes, graphite powder was effective in antique locks from 150 years ago until the late 1900s. Older locks had larger mechanisms with more spacious casings that could accommodate the powder, as long as the lock was completely dry. However, modern locks are built much smaller with tighter tolerances.

Why do locks stick in cold weather?

Metal contracts when cold, causing lock springs to become stiff and pins to fit differently in their housing. This makes it more difficult or even impossible to turn the lock. Additionally, moisture can condense on cold metal and then freeze, creating obstructions to moving parts.

What causes keys to break off in locks during winter?

Keys snap off when they are forced in a lock that is jammed due to cold-contracted metal parts. When the springs and pins are contracted and stiff from cold temperatures, forcing the key creates enough stress to cause it to break.

Should I use graphite powder to fix a sticking lock in winter?

No, avoid using graphite powder. It acts like adding dirt to the lock on purpose and jams locks the same way any other dust would. Instead, use a non-petroleum based lubricant specifically designed for locks.

What is lock sweating and why does it happen?

Lock sweating occurs when temperature increases enough for moisture to condense on cold metal inside the lock, such as when morning sun hits a lock after a cold night. When the temperature drops again, this condensed moisture freezes and can obstruct moving parts.

How can I prevent winter lock problems?

Use a lock cover to prevent moisture and dirt from entering, keep your keys clean, maintain the lock as dry as possible during winter, use non-petroleum based lubricants, and schedule regular professional maintenance, especially in climates with dramatic temperature fluctuations like Milwaukee.

Why don't oil-based lubricants work well in winter?

Standard oil-based lubricants pick up dust and thicken in cold weather, causing the oil to gather up in dirty globs that prevent proper operation and can leave parts of the lock without lubrication altogether.

How did Pinky's Locksmithing get started?

Pinky's started after years of skill-building and working for other locksmith companies. The founder wanted to operate an independent business based on personal values and ideas, combining passion for locksmithing and problem-solving with a commitment to truly helping people.

Why is it called Pinky's Locksmithing?

The name came from the idea of having a big pink van that would be noticeable on the freeway. While some suggested clever plays on words like 'Pin-Keys', the founder chose 'Pinky's Locksmithing' - not clever, just pink. The full word 'Locksmithing' was chosen because locksmithing is the name of the trade, and a locksmith is the tradesman.

What values does Pinky's Locksmithing operate on?

Pinky's Locksmithing is built on honesty, transparency, and integrity. The business believes in calling things what they are - for example, never selling used parts as new. The company values realness over shortcuts and focuses on quality service for customers.

Is Pinky's Locksmithing a family business?

Yes, Pinky's Locksmithing is a family-owned business started with full support from the founder's wife. They dove in together to make Pinky's a reality, building a business that works for their family while serving the Milwaukee community.

What happened in the Milwaukee locksmith robbery?

In early 2025, a Milwaukee locksmith was robbed at gunpoint during what appeared to be a routine car key reprogramming service. The perpetrator, Javon Smith, and an accomplice lured the locksmith under false pretenses, then stole his vehicle along with all his equipment and inventory. Smith was later caught and sentenced to 10 years in prison.

Why do locksmiths ask for ID before unlocking doors?

Locksmiths request identification to verify that the person requesting service actually lives at or has legal access to the property. This prevents locksmiths from unknowingly helping criminals break into homes or vehicles. It's a standard safety and ethical practice in the industry.

What are red flags that make a locksmith refuse a job?

Red flags include: inability to provide ID for the property, deadbolts locked from inside when claiming to be locked out, inconsistent stories, customer appears intoxicated and needs vehicle access, overly relaxed attitude for someone supposedly locked out, or gut feeling that something isn't right about the situation.

Will a locksmith refuse service if I seem suspicious?

Yes, professional locksmiths prioritize safety over payment. If a locksmith asks questions about your situation, they're both trying to help you and assessing whether it's safe to respond. Legitimate customers should expect to provide ID and answer questions to verify they have legal access to the property or vehicle.

Why won't a locksmith unlock a car for an intoxicated person?

Ethical locksmiths refuse to unlock vehicles for visibly intoxicated individuals because it would enable drunk driving. Providing access to a vehicle for someone who is impaired puts lives at risk and goes against the professional responsibility to do no harm.

Ya just never know!

Locksmith@Pinky's
Dec 11, 2025
1 min read

Yep, behind every door is a mystery. Today the bullets were safely..... on the floor.

Ya just never know!

Recent Posts

Comments